FDDP00010T
F-150 Catted Downpipe
More power and great sound are high priority items when buying a 3″ to 3.5″ F-150 Catted Downpipe. With that said, it’s the fine details are what ensure that the product will satisfy the end-user for a lifetime.
Matching the stock turbo, our F-150 Catted Downpipe includes a CNC milled turbo flange for easy installation and stock compatibility. Premium American made “bright annealed” 304 stainless steel is the source of our downpipe’s strength. Additionally we mandrel bend the pipes throughout for less turbulent exhaust flow. We include three O2 bungs to accommodate the two stock O2 sensors. Additionally, this gives the ability to easily add a wideband sensor. We offer an optional high flowing catalytic converter that features a metallic monolithic honeycomb catalyst designed for maximum flow and surface area. For those that opt-out of the high flowing cat, the Catted downpipe will include a cp-e™ Smart O2 Simulator to help eliminate the unwanted check engine light.
F-150 Catted Downpipe Features
- 5% gains throughout RPM band
- CNC-milled Stainless Steel turbo flange
- Extra O2 bung for adding a wideband sensor
- Laser cut stainless steel bracket
- Laser cut stainless steel gasket adapter
- Full 3″ to 3.5″ mandrel bent 304 stainless steel
- 3/8” thick laser cut flanges
- Included Smart O2 Simulator with Catted Downpipe
- Strengthening & Uniform satin finish
- Made in the U.S.A.
- Lifetime Warranty
Also helping to accommodate the stock mounting, cp-e™ has designed this downpipe to use the stock downpipe support mount by welding a laser cut stainless steel bracket onto each downpipe.
cp-e™ has taken the extra step to supply a laser cut gasket adapter with the F-150 EcoBoost Downpipe. This adapter will allow the installer to install the downpipe to a stock exhaust without the worry of exhaust leaks. Without this adapter the 3.00” downpipe will be larger than the stock exhaust flange, allowing exhaust gases to escape past the gasket. This adapter allows the customer to buy a true full 3.00” downpipe instead of being limited to a downpipe that needs to neck down at the flange. Along with the gasket adapter, the F-150 EcoBoost Downpipe comes with the necessary hardware needed to mount it to a stock exhaust system as well as an aftermarket exhaust system.
Finally, the downpipe features the all-new finish from cp-e™. This satin finish not only gives a uniform clean finish throughout, but also strengthens the stainless steel and the welds for added reliability. Made in the U.S.A. and backed by a lifetime warranty, all your bases are covered.
While this may not trip a Check Engine Light, we cannot guarantee that all of the codes will be in the “ready” state.
F-150 EcoBoost Downpipe Highlights
Full 3″ to 3.5″ Design
Our downpipes for the EcoBoost F-150 were designed with maximum flow and the quickest spool times in mind. To accomplish this, we went with a full 3″ design directly off of the turbos that merges into a 3.5″ pipe. This promotes quick spool while maintaining the needed back pressure.
Optional High Flow Cat
The cp-e™ F-150 EcoBoost Downpipe is available with or without a high flow catalytic converter. Maximum gains can be found without a cat, but the catted version is incredibly high flowing and sees extremely low parasitic loss from the catalytic converter.
Factory Fit & Finish
This QKspl™ downpipe system is manufactured for a perfect fit and finish. This downpipe will work perfectly with your stock cat back for a stealth install or along with our forthcoming Austenite™ exhaust system for the most pure sound.
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor