IE's 2.9T ECU upgrade dramatically increases horsepower, torque, engine response, power delivery, and more to release the full performance potential from your 2018-2023 Audi RS5 or RS4! Multiple stages are available to match typical bolt-ons and offer various fuel options and features while maintaining stock comfort and reliability. Enjoy a hassle-free install in minutes through the vehicle's OBD-II port, and get ready for supercar power from your RS-class Audi!
ADD UP TO
+148 HP
OVER STOCK
TRANSFORM YOUR AUDI
FLASH AT HOME
IN ONLY MINUTES
ADD UP TO
+175 FT-LBS
TORQUE OVER STOCK
LEADING FEATURES
- Horsepower & torque gains maximized
- Includes 91, 93 & E85 fuel options
- Stage 1 for stock hardware or basic bolt-ons
- Stage 2 for full bolt-on support
- Stage 1 & 2 Plus HPFP for maximum ethanol power
- Stage 1 Transmission tune included with ECU purchase
- Stage 2 Transmission tune upgrade available
- Engine RPM limit raised to 7000RPM
- Neutral/park free-rev limit raised to 6800 RPM
- Recalibrated power & torque gauge displays higher output
- Rescaled factory boost gauge shows greater boost
- Left foot/brake boosting enabled for rolling launch
- Eliminated/minimized turbocharger surge
- Reduced turbocharger lag
- Road speed limiters removed
- More aggressive overrun/crackle in Dynamic mode (Stage 2)
- Crackles enabled for free revving in park or neutral (Stage 2)
- Optimized throttle scaling for dependable throttle use
- Boost control reconfigured for smooth and crisp power delivery
- Reliable fuel ratios for safe exhaust gas temps on all fuels
- Engineered for all climates and elevations
- Direct port OBDII at-home flashing
ECU STAGES
HIGH PERFORMANCE ENGINE PROGRAMMING
IE 2.9T STAGE 1
IE Stage 1 ECU calibration is a simple flash-only upgrade that delivers instant performance with up to 542HP and 558ft-lbs of torque! The larger powerband, 7000RPM rev limit, and increased boost pressures produce exceptionally faster 0-60 times and acceleration in any scenario. This advanced calibration can be installed in an entirely stock car or will adapt to take advantage of intake and intercooler upgrades.
See performance tab for full performance results & dyno reports
IE 2.9T STAGE 1 PLUS
IE Stage 1 Plus delivers the most power possible from E85 fuel with an upgraded HPFP (High Pressure Fuel Pump). By increasing the fuel pump's ability to supply additional ethanol demands, our Stage 1 Plus tune produces an even more significant surge in power with a massive 604 horsepower and 660ft-lbs of torque! This ECU calibration pushes your Audi RS5/RS4 into a higher vehicle class of performance with an intense pull. Requires HPFP upgraded internals with 11.7mm pin size
Stage 1 Plus is included at no additional cost.
IE 2.9T STAGE 2 / STAGE 2 PLUS
IE Stage 2 and Stage 2 Plus ECU tunes are calibrated for aftermarket downpipes to deliver a louder exhaust note and include a more aggressive exhaust overrun/crackle feature in dynamic drive mode.
The 2.9T engine includes two already efficient factory downpipes that do not result in power or exhaust restrictions on stock turbocharger ECU tunes. Although this platform does not provide additional power gains on Stage 2 tunes, IE files will provide the necessary ECU calibrations to support aftermarket downpipes for users looking for a more aggressive exhaust note.
UPGRADING STAGES
Upgrading from Stage 1 to Stage 2 or beyond is easy! With IE, you only pay the difference in tune cost with no extra fees. After installing any required hardware, launch your IE POWERlink software and enjoy the next power level in minutes!
HARDWARE GUIDE
While no hardware upgrades are required for Stage 1, upgrading the intake, turbo inlet, and intercooler will provide increased airflow, lower intake air temps, and quicker heatsoak recovery for an overall more efficient and faster vehicle.
| PART UPGRADE | STAGE 1 | STAGE 2 | NOTES |
|
STAGE 1 TCU TUNE (INCLUDED) |
|
|
Required (inlcuded with purchase) |
|
STAGE 2 TCU TUNE |
|
|
Compatible with all stages |
|
AIR INTAKE |
|
|
Compatible with all stages |
|
TURBO INLET PIPE |
|
|
Compatible with all stages |
|
INTERCOOLER |
|
|
Compatible with all stages |
|
HEAT EXACHANGER |
|
|
Compatible with all stages |
|
HPFP UPGRADE |
|
|
Requires Stage 1 or 2 Plus |
|
CATBACK EXHAUST |
|
|
Compatible with all stages |
|
DOWNPIPES |
X |
|
Not Compatible With Stage 1 |
TECHNICAL FEATURES
IE calibration engineers have not only made the engine more powerful, every ECU stage includes extensive adjustments and features to make every bit of the driving experience refined and enjoyable.
EXHAUST OVERRUN
Stage 2 files turn up the volume on exhaust overrun crackles for an exciting exhaust sound on engine decel and when free-revving in neutral or park. This feature is only enabled in Dynamic drive mode. Exhaust Overrun is included on stage 2 tunes only.
BRAKE BOOST
Brake Boosting is commonly used in roll racing, which allows you to build extra boost by applying brake pressure while accelerating. Release the brake pressure for a "rolling launch" or extra power surge.
Brake Boost is included on all tune stages.
THROTTLE MAPPING
IE engineers have mathematically rescaled the entire mass flow model over 30 maps which corrects the entire throttle input range. This extensive remapping work delivers a linear and predictable throttle pedal with clean and linear boost delivery, which improves drivability in any scenario.
BOOST CONTROL
The stock ECU, boost control programming is a very "close enough" approach, which works fine in low-boost and stock power output. When increasing performance, this slow response is reflected in the torque curve and can feel erratic on long power pulls. IE calibrators have smoothed the power curve by introducing a new boost control mapping strategy with precision boost request targeting, resulting in unmatched power delivery.
VE MODELING
The factory 2.9T engine's MG1 ECU relies on a complicated volumetric efficiency (VE) model to convert boost to engine load and accurately deliver fuel for various conditions. Instead of depending on fuel correction tables to compensate, our calibrators have remodeled the VE mapping for the new boost/load relationship. This extensive work delivers reliable and proper fueling and smooth power delivery you can feel.
EGT OPTIMIZATION
ECU programming uses exhaust gas temp (EGT) readings to make air/fuel corrections and determine the health of the combustion cycle. Countless development hours were spent adjusting boost, air/fuel ratio, ignition timing angle, camshaft phasing, intake air temps, and much more to develop the proper EGT adjustments for every octane file.
Enjoy power gains from different fuel options knowing each was individually optimized to provide reliable engine operation without sacrificing power.
STAGE 2/DOWNPIPE NOTICE: BY PURCHASING A MOTORSPORT/RACING PRODUCT ("PRODUCT"), YOU REPRESENT THAT YOU UNDERSTAND AND AGREE THAT: THE PRODUCT IS NOT DESIGNED TO MEET ANY APPLICABLE EMISSIONS STANDARDS, WHETHER IN THE USA OR OTHERWISE, THE PRODUCT IS NOT C.A.R.B. COMPLIANT, AND THAT THE PRODUCT IS NOT FOR SALE OR USE IN CALIFORNIA, USA NOR ANY OTHER JURISDICTION WHERE THE SALE OR USE IS PROHIBITED BY LAW. INTEGRATED ENGINEERING, LLC MAKES NO REPRESENTATIONS, WARRANTIES, OR CLAIMS THAT THIS PRODUCT COMPLIES WITH ANY APPLICABLE EMISSIONS LAWS AND EXPRESSLY DISCLAIMS ANY AND ALL SUCH REPRESENTATIONS, WARRANTIES, AND CLAIMS, WHETHER EXPRESS OR IMPLIED. BY PURCHASING THIS PRODUCT, YOU REPRESENT, WARRANT, AND AGREE THAT IT IS YOUR RESPONSIBILITY TO INFORM YOURSELF OF ANY LAWS OR REGULATIONS THAT MAY APPLY TO YOUR PURCHASE AND/OR USE OF THE PRODUCT.
AVAILABLE FEATURES
- Increases transmission torque limits
- Enables launch control in drive, sport, and manual modes
- Includes user-adjustable launch control
- Lightning-fast shift speed
- Stage 1 & 2 optimized shift points for the fastest acceleration
- Stage 1 & 2 Plus optimized shift points available
- Enables 7000 RPM limit in all gears in manual
- 7th and 8th gear enabled in sport mode
- Enables downshifting into 1st gear without coming to full stop
- Refined drive for the automotive enthusiast
- Reduces time for double-downshifting gears
- Line pressure increased to protect against trans slip
TCU STAGES
HIGH PERFORMANCE TRANSMISSION TUNING
IE 2.9T STAGE 1 TCU
IE ECU tunes far exceed the torque limitations of the stock RS5/RS4 transmission programming, which triggers the TCU to limit power output. The included IE stage 1 TCU tune raises these torque limits while keeping all transmission driving characteristics otherwise stock.
Stage 1 TCU is included with all ECU tunes at no extra charge.
IE 2.9T STAGE 2 TCU
IE's Stage 2 and 2 Plus TCU tunes are complete performance transmission calibrations that delivers lightening fast shifts, optimized shift points, multiple launch-control modes, enthusiast drive mapping, and more! Pairing this TCU calibration with an IE Stage 1 or Stage 2 ECU tune will significantly transform every aspect of your RS5 or RS4, delivering faster launches, higher Gs, and further improved acceleration. Stage 2 Plus TCU is for use with Stage 1 & 2 Plus ECU tune.
Stage 2 & 2 Plus TCU is an optional upgrade and sold separately.
STAGE 2 OPTIMIZED SHIFT POINTS
Stage 2 TCU remaps each gear's RPM limits for the fastest possible acceleration by shifting at the optimal points to keep the engine in peak torque/power output. This strategy pulls the car through the powerband as quickly as possible with incredible improvements in acceleration and G's. These optimized shift points occur when in drive mode, sport mode, and AMAX. The transmission limit remains 7000 RPM in all gears in manual mode, retaining complete manual control over the shift points.
STAGE 2 OPTIMIZED SHIFT POINTS
| GEAR | SHIFT RPM |
|
1st Gear |
6900 RPM |
|
2nd Gear |
6900 RPM |
|
3rd Gear |
6450 RPM |
|
4th Gear |
6550 RPM |
|
5th Gear |
6500 RPM |
|
6th Gear |
6800 RPM |
STAGE 2 PLUS OPTIMIZED SHIFT POINTS
| GEAR | SHIFT RPM |
|
1st Gear |
6750 RPM |
|
2nd Gear |
6700 RPM |
|
3rd Gear |
6200 RPM |
|
4th Gear |
6350 RPM |
|
5th Gear |
6250 RPM |
|
6th Gear |
6250 RPM |
TCU TUNE FEATURES
| FEATURE | STAGE 1 TCU | STAGE 2 TCU |
|
Increased torque limits |
|
|
|
Enthusiast performance mapping |
X |
|
|
Faster shift speeds |
X |
|
|
User-adjustable variable launch control |
X |
|
|
Enabled launch control in all drive modes |
X |
|
|
Optimized shift RPM by gear |
X |
|
|
Raised RPM limit in manual mode |
X |
|
|
Enabled 1st gear downshift without coming to stop |
X |
|
|
Faster shift speed for double-downshifting |
X |
|
|
Stage 1 & Stage 2 ECU support |
|
|
MAXIMIZED OUTPUT
IE's advanced tuning technology suite allows our software engineers to realign all safety protocols and sensors for the new performance calibration. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with the power to keep you smiling every mile!
POWER GAINS
North American Region (NAR) = AKI / Rest Of World (ROW) = RON
| STAGE / FUEL | HORSEPOWER | TORQUE |
|
Stock Audi advertised numbers |
444 HP |
443 FT-LBS |
|
Stock IE dyno numbers |
456 HP |
485 FT-LBS |
|
Stage 1 & 2 91 AKI / 95 RON |
502 HP |
565 FT-LBS |
|
Stage 1 & 2 93 AKI / 98 RON |
522 HP |
572 FT-LBS |
|
Stage 1 & 2 E85 |
542 HP |
581 FT-LBS |
|
Stage 1 & 2 Plus E85 |
604 HP |
660 FT-LBS |
IE calibrators have maximized stock turbos and extracted full power potential on Stage 1 tunes without needing downpipe upgrades. Stage 2 and 2 Plus tunes are calibrated for aftermarket downpipes but will produce the same power as Stage 1 and Stage 1 Plus ECU tunes.
DYNO CHARTS
Dyno numbers are for reference against stock numbers only. Personal dyno results will vary depending on fuel quality, local conditions, dyno brand, and correction factors.
EASY INSTALL FROM HOME
IE's POWERlink Cable and Flash Wizard software gives you the freedom to quickly flash your new IE ECU Tune. Simply plug your POWERlink into the vehicle's OBD-2 port and follow the on-screen directions, it's that easy!
Expand the buttons below for more details on these features
DIRECT PORT
OCTANE SWITCHING
UPGRADE STAGES
TOGGLE FEATURES
CODE READER
DATA LOGGER
FITMENT GUIDE
| MAKE | MODEL | YEAR | GENERATION |
|
AUDI |
RS5 |
2018-2023 |
B9/B9.5 |
|
AUDI |
RS4 |
2018-2023 |
B9/B9.5 |
MPORTANT INFORMATION
TUNE UPDATES
Your tune purchase entitles you to free updates to any tune revisions, new octanes, standard features, or software updates. In the event the original vehicle manufacturer issues an ECU update, this will also be included to you through IE at no additional charge.
POWERLINK VINS
Have multiple cars in the family or friends that are also ready for an IE Tune? Your POWERlink Flash Tool can be used on up to 5 different vehicle VINs. Tunes sold separately.
TUNE REGISTRATION
Once a tune purchase is applied to your vehicle's ECU, the tune is permanently registered to the vehicle and non-transferable to other vehicles. Tunes can be transferred to a second party in the event of vehicle transfer of ownership only.
REQUIRES V4 IE POWERLINK
The Audi MG1 uses new and updated flashing protocols to read and write the ECU and TCU information. Older V3 IE POWERlinks do not include the required internal hardware need to flash the B9 2.9T calibrations. If you are purchasing credits with an existing IE POWERLINK, please be sure your serial number on the back begins with V4.
ENGINE SPECS
|
ENGINE FAMILY |
EA839 |
|
CYLINDERS |
6 |
|
INDUCTION |
Twin-Turbocharged |
|
DISPLACEMENT |
2.9L |
|
ORIENTATION |
Longitudinal |
|
FUEL |
Gasoline (AKI / RON) & Ethanol (tuned only) |
|
AVAILABILITY |
North America (NAR) & Rest of World (ROW) |
|
|
POWERLINK SYSTEM REQUIREMENTS
| DEVICE | PORTS | OS | PROC. | POWER | RAM |
|
Laptop or Tablet |
Wifi & USB |
Windows 10 or newer |
32 or 64 bit |
1.0ghz or greater |
4GB or greater |
DOWNLOADS
| FILE | SYSTEM | SIZE | DOWNLOAD |
|
IE Flash Wizard Setup |
Windows 10 or newer |
799kb |
|
FIVE-STAR SUPPORT
Our number one goal from purchase to installation is to provide you with the best customer experience in the industry. We want what you want; a simple purchase process, products that exceed expectations, and a brand that's got your back. If at any point you have any questions, need help, or require support with your new tune our educated customer support team and tuning specialists are standing by and happy to help. Purchasing an IE tune not only guarantees a quality product, but that you will always have us in your corner.
Having some trouble? Don't worry, our team of tuning specialist are here to help. Fill out the form on our Support Page to start a ticket.
" Customer service is second to none!
-Zach
" Earned a customer for life
-Brenton
" A+++
-Sonny T
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor