JHM Solid Short Throw Shifter B6-B7 S4 and RS4

JHM-STS-B6B7S4

PROUDLY DESIGNED AND BUILT IN CALIFORNIA! THE JHM SOLID SHORT THROW SHIFTER IS THE NUMBER ONE SHORT THROW SHIFTER ON THE MARKET! TESTED IN THE REAL WORLD SINCE 2006!

New JHM Steel shaft, JHM solid pivot assembly, Tig Welded Steel lower link, Delrin Bushings, New pushdown reverse springs (stock, medium and stiff), 4 bushings to allow more clearance in the shifter box for the most throw reduction possible and all other hardware. Retains stock shifter knob. Instructions are not included with the package, just use the video and document links below and watch prior to installing.

COMES COMPLETELY ASSEMBLED (retains pushdown reverse) Ready to be installed into your factory base.

Our B6/B7 S4 and RS4 specific shifter is configured as follows. 1/2" shorter knob height and 40% and 25% reduction settings (you adjust as needed, ships in the most popular 40% setting). See this pic for more info regarding the adjustment -->HERE

Additional pushdown reverse springs included for those aggressive drivers that have the tendency to accidentally push the shifter down while shifting. Comes assembled with the soft spring (plain) and comes with a medium (silver) and stiff (gold) spring to taylor to your liking.

PICTURE OF A DISASSEMBLED JHM SHIFTER -->HERE

INSTALLATION VIDEOS AND NOTES

Supplemental install instructions (adjustment of the 6-speed type shifter) -->HERE

UPDATED supplemental adjustment procedure for B6/B7 S4 and RS4 only. -->HERE

Install Notes for the shifter spacers-->HERE