8 Cylinder Additive Kit (Step 1) - Liqui Moly LMK0005

At FCP we take preventive maintenance seriously and we believe you should too. We have looked into the most common maintenance items that are missed by owners and created a kit that will help them get the most value out of their vehicles, and above all protect their investment.

This kit was designed for the modern 8 cylinder Gasoline engines both Direct Injected and non Direct Injected found in various European vehicles in the US Market.

We paired products that complement each other and work together to create the highest levels of protection for your vehicle.

Included in this kit are:

2 x LM2037 Pro-Line Engine Flush

• The flush gently cleans the insides of the engine and helps with the removal of dirt and sludge that has built up over the years.
• Pour in 1 bottle for every 5 Liters of oil. Run the vehicle at idle for 10-13 minutes. (DO NOT DRIVE VEHICLE!!!) Then proceed with draining the oil, replacing the oil filter and pouring in fresh oil from Liqui Moly.
• The filling quantity for this product is good for up to 10 Liters of oil capacity. Please administer accordingly.

2 x LM20002 CERA TEC Oil Additive

• CERA TEC helps protect the engine by coating all the moving parts that come in contact with your oil in a ceramic coating.
• This coating helps level out scoring and wear on items such as (Cams, Cylinder Walls, Rod bearings etc)
• It also helps reduce friction after the engine has been treated. (Coating takes place within 700 miles)
• Add 1 bottle of CERA TEC for every 5 liters of oil. (CERA TEC has a milky color to it and when the engine is cold it may appear as if excess water is in the engine. This is normal)
• CERA TEC is designed to be used every 5th oil change or every 25k miles.
• The filling quantity for this product is good for up to 10 Liters of oil capacity. Please administer accordingly.

2 x LM2020 Motor Oil Saver Oil Additive

• Motor Oil Saver is literally that, it saves oil from being consumed or leaked.
• This product helps soften up plastic and rubber seals/gaskets. It also helps them swell up.
• Doing this helps minimize leaks from places such as: (Oil Pan Gaskets, Valve Cover Gaskets, Oil Filter Housing Gaskets and Valve Stem Seals)
• This product takes time to work and will require at least 1000 miles of usage prior to any positive effects taking place
• Keep in mind if you are losing a few liters of oil between oil changes this may not save you. If you are slowly developing oil sweats and small leaks then this will help rejuvenate your seals.
• The filling quantity for this product is good for up to 10 Liters of oil capacity. Please administer accordingly.
• This product is to be used as needed depending on condition of your seals. Usually one application will help rejuvenate most dried out seals.

1 x LM2030 Fuel System Cleaner

• This powerful Fuel System Cleaner helps keep your fuel system in tip top shape, from your low pressure pump, to your high pressure pump down to your injectors.
• It has been Designed to clean your injectors and help keep carbon deposits to a minimum.
• Fuel System Cleaner should be used every 20-25k to freshen the system up.

This selection of treatments should be used together to ensure your engine enjoys a clean and trouble free life. It is suggested that this kit be purchased every 5th oil change or every 25k miles. This is what is deemed to be the first step in preparing your engine for proper care.

The second step kit is used for every oil change between the 25k interval so for oil change 2, 3, 4, and 5.

Keep in mind. When administered these products increase the volume of fluid in your crankcase. Please be mindful to not overfill your oil when adding these products.

The STEP 2 kit can be found HERE

Note: If you are changing oil types/manufacturers we recommend you start with this kit to get a proper baseline. Cleaning the engine and then sealing it with CERA TEC.

Fits These Cars