AutoMeter Gauge Quad 3-3/8in. 0 Ohm(e) to 90 Ohm(f)Elec Arctic White

Product 1314 DESCRIPTION:
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 0 ohms empty to 90 ohms full (compatible with Amid 60’s through mid 90’s GM fuel level senders).
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Gauge kit includes 1/8" NPT pressure sender, 1/4" NPT adapter, 1/8" NPT temperature sender, 3/8" and 1/2" NPT adapters, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
Domed Lens
Ships With
Includes Sending Unit: Oil Sender 2242 - Water Sender 2258
3/8" NPT and 1/2" NPT adapter fittings
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 3-3/8" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/0-90 Ω, ARCTIC WHITE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
7
Questions
6
Answers
Questions
Ask a question
1–7 of 7 Questions
Sort by:
▼
Menu
Wolfdog15
· a year ago
I need a heat temp sensor for 3-3/8” quad gage do you have one
1
answer
Answer this Question
Paul G. · a year ago
Temperature senser part number you will need is. 2258
Helpful?
Yes · 0
No · 0
Report
BilGro1946
· 3 years ago
Are the #1881 & #1812 or the 2 piece kit #1820 suitable for use on a motorcycle as they would be exposed to the elements, ie, Rain, Snow, Heat, Cold, and etc?
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
No, these are not suitable for a motorcycle. We would only recommend products from our Pro-Cycle line.
Helpful?
Yes · 0
No · 0
Report
Frank VDH
· 4 years ago
will this quad gauge work (fuel gauge) on old 74 ford f100? If not which quad would work?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. No, this will not work as the fuel level range is completely different. You would need a 73-10 non-linear fuel level gauge, which we do not offer in the quad gauges. I would recommend swapping out fuel level sending units to match the gauge.
Helpful?
Yes · 0
No · 0
Report
horn
· 4 years ago
will quad gauge work with ls engine with gm computer and transmission
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Hello! 1314 compatible with an LS with the use of the Gauge Install Kit for LS Motors (5284), which would usually be required in addition to the Quad Gauge
Helpful?
Yes · 0
No · 0
Report
jjack
· 6 years ago
what king of fuel sender is required for this gauge
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. This gauge will work with a 0 ohm at empty to 90 ohms at full, fuel level sensor, which was used on GM vehicles between 1965-1996.
Helpful?
Yes · 0
No · 0
Report
jjack
· 6 years ago
instructions say a 33- 240 ohm fuel sender for the 1314 gauge is that true?
1
answer
Answer this Question
Jim from AutoMeter · 6 years ago
Thank you for your inquiry. The 1314 is designed for a 0 to 90 ohm fuel level sender. The instruction covers many Quad Gauges, and some of those are 240 to 33 ohm. The product description on the website is correct.
Helpful?
Yes · 0
No · 0
Report
76Warrent
· 5 years ago
What is the part number for a replacement temp sensor? Thanks!
0
answers
Answer this Question
Ask a question
You may also like:
FITTING, ADAPTER, METRIC, M12X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2277
$16.69
FITTING, ADAPTER, METRIC, M16X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2268
$15.68
FITTING, ADAPTER, RADIATOR HOSE, 1.5", 3/8" NPTF FEMALE, ALUMINUM
Product #2283
$62.14
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM
Product #2282
$60.03
FITTING, ADAPTER, HEATER HOSE, 5/8", 1/8" NPTF FEMALE, BRASS
Product #2280
$46.99
LED BULB, REPLACEMENT, T3 WEDGE, WHITE
Product #3288
$13.72
Also Purchased With
3-3/8" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/240-33 Ω, ARCTIC WHITE
Product #1312
$255.00
3-3/8" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/0-90 Ω, DESIGNER BLACK
Product #1414
$234.28
3-3/8" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/0-90 Ω, OLD-TYME WHITE
Product #1614
$265.87