Autometer Designer Black 3-3/8in Quad Gauge - Fuel Level/Oil Pressure/Water Temperature/Voltmeter

Product 1412 DESCRIPTION:
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Gauge kit includes 1/8" NPT pressure sender, 1/4" NPT adapter, 1/8" NPT temperature sender, 3/8" and 1/2" NPT adapters, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
Domed Lens
Ships With
Includes Sending Unit: Oil Sender 2242 - Water Sender 2258
3/8" NPT and 1/2" NPT adapter fittings
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
Write a review
. This action will open a modal dialog.
Nevada
Review 1
Vote 1
★★★★★
★★★★★
5 out of 5 stars.
Years of Service
Had these 'in-dash' in my Buick GS for 10+ years and they've worked flawlessly. Caution: Be sure to verify which send unit is needed. I got the 240-33 ohm and now got a new fuel tank that came with 30-0 ohm send unit so am in a pickle trying to find the correct fuel level send unit.
Recommends this product ✔ Yes
Helpful?
Yes · 1
No · 0
Report
Write a review
QUESTIONS:
★★★★★
★★★★★
5 out of 5 stars. Read reviews for 3-3/8" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/240-33 Ω, DESIGNER BLACK
5.0
1 Review
This action will navigate to reviews.
Search questions and answers
Search questions and answers
ϙ
Search
1
Review
12
Questions
11
Answers
Questions
Ask a question
1–10 of 12 Questions
Sort by:
▼
Menu
smallz80
· 3 years ago
Hi, I have a 74 J10 Jeep pickup. To my Knowledge the sending unit requires 75 ohms E 10 ohms F. Will this work for my truck and if not do you have a gage in this style that will work?
1
answer
Answer this Question
Thomas From AutoMeter · 3 years ago
This gauge will not work with that as the fuel level is a 240-33 ohm range. If you would like, we recommend checking out the 9109 if you would still like this gauge.
Helpful?
Yes · 0
No · 0
Report
GoLf_TH
· 3 years ago
works with diesel oil engines or gasoline engines
1
answer
Answer this Question
Sarah from AutoMeter · 3 years ago
Thank you for your question. Yes, it is compatible with diesel.
Helpful?
Yes · 0
No · 0
Report
TBoyatt
· 4 years ago
Hello, I am running an old school chevy 350 engine. Is this gauge need to run through a pcm?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. This gauge works off of the sending units that come with the kit. This wouldn’t be able to work solely off the PCM.
Helpful?
Yes · 0
No · 0
Report
Flavio Matsuhashi
· 4 years ago
Hi. I'd like to know if the Quad Gauge is available with metric system?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. Unfortunately, we do not currently offer any quad gauges in metric units.
Helpful?
Yes · 0
No · 0
Report
Carlos mustang
· 5 years ago
Can I get a sending unit for fuel gauge?
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Hi Carlos,
Our 3262 fuel sender will work with this Quad Gauge:
https://www.autometer.com/universal-fuel-level-sender-240-e-33-f.html
Thanks,
Jim
Helpful?
Yes · 0
No · 0
Report
71GS
· 5 years ago
Is auto meter quad gages have a low fuel warning light and aftermarket add on
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. Unfortunately these gauges do not have a warning light. You will need to use our Elite series fuel level gauge P/N: 5609 to achieve this.
Helpful?
Yes · 0
No · 0
Report
mwells
· 5 years ago
Does the gauge have a light in it? Thanks!
1
answer
Answer this Question
Steve from AutoMeter · 5 years ago
Thank you for your question. The gauge does come with an incandescent bulb to light the gauge.
Helpful?
Yes · 0
No · 0
Report
Mattias
· 6 years ago
Hello, two Q : 1) I get that the fuel meter is for 240-33 ohms. But what are the ohm numbers for the water temp gauge? 2) If I print out another design of the front face, is it possible to swap without destroying needle and bezel? Thanks!
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
Hi Mattias, thank you for the question. We include the temperature sender, which is an ohm range of 1100 ohms to 65 ohms across the 100-250 degree range. Due to the metal bezel that is crimped on the instrument and the pointers, attempting to remove or modify the face is definitely something we would strongly advise against.
Helpful?
Yes · 0
No · 0
Report
jimn12
· 6 years ago
Is the glass on the Designer Black Series flat or domed? Some of the pictures show a curved reflection. No mention on the website, or am I just missing it??
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
Thank you for the question. The Designer Black Series does feature a domed lens. I think that feature is missing from the site, but shouldn't be. We're looking into that now.
Helpful?
Yes · 0
No · 0
Report
Hawkman
· 6 years ago
A little more info on the dimensions, please. Actual diameter size of the gauge body, actual diameter size of gauge bezel, depth of gauge body from the bezel back.
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
Hi Hawkman, thank you for the question. We recommend a 3-3/8" hole size for mounting, but the actual case diameter is 3.348". The bezel diameter is 3-3/4" and the depth from the back of the bezel to the back of the case is 2-1/8" but you'll actually require about 3-1/2" of clearance for the mounting studs and electrical connections.
Helpful?
Yes · 0
No · 0
Report
1–10 of 12 Questions
Previous Questions
◄
Next Questions
►
Ask a question
You may also like:
FITTING, ADAPTER, METRIC, M12X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2277
$16.69
FITTING, ADAPTER, METRIC, M16X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2268
$15.68
FITTING, ADAPTER, RADIATOR HOSE, 1.5", 3/8" NPTF FEMALE, ALUMINUM
Product #2283
$62.14
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM
Product #2282
$60.03
FITTING, ADAPTER, HEATER HOSE, 5/8", 1/8" NPTF FEMALE, BRASS
Product #2280
$46.99
LED BULB, REPLACEMENT, T3 WEDGE, WHITE
Product #3288
$13.72
Also Purchased With
3-3/8" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/0-90 Ω, DESIGNER BLACK
Product #1414
$234.28
3-3/8" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/240-33 Ω, ARCTIC WHITE
Product #1312
$255.00
3-3/8" QUAD GAUGE, 240-33 Ω,OLD TYME BLK
Product #1713
$246.31