AutoMeter Gauge Tachometer 5in. 10K RPM Pedestal W/ Peak Memory Silver Auto Gage

Product 233907 DESCRIPTION:
Getting great performance or saving money doesn’t have to be choice. Engineered by AutoMeter in Sycamore, IL, The Auto Gage line of instruments provide the best bang for the buck performance in the industry. For a fast street car or a weekend racer, Auto Gage provides levels of accuracy and durability unheard of in the price category. With countless wins in magazine comparison tests, the best value in gauges comes from exactly the place you’d expect it to. AutoMeter.
Feature Points
Traditional incandescent lighting illuminates the front of the dial
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
AutoMeter’s race proven air-core electric tachometers provide quick and accurate readings with a needle so responsive it can go from 0 - full scale in 333 milliseconds
Compatible with most 4, 6, and 8 cylinder engines (2 - 4 pulse per revolution ignition signals) with points, electronic, and most 12V high-performance racing ignitions.
Triage engine health and setup changes using Peak RPM Memory recall with one touch review. Commonly referred to as the 'tattle tale' in the racing world, this function allows racers to gain quick insights between rounds about wheel spin, gearing and gear changes.
Optional Shift Light support allows you to optimize use of your engine's power band and improve vehicle run performance and driver gear changes with a rapid response, high visibility user-programmable shift light.
Ships With
3209
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 5" PEDESTAL TACHOMETER, 0-10,000 RPM, MEMORY, SILVER, AUTO GAGE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
7
Questions
7
Answers
Questions
Ask a question
1–7 of 7 Questions
Sort by:
▼
Menu
Chuck 1944
· 2 years ago
Good morning, do I need to use your RPM signal adaptor with this tach? This is in a sand rail with a 2002 Honda with stock ECU?
1
answer
Answer this Question
Jim from AutoMeter · 2 years ago
Most 2002 Hondas have a dedicated Tach Test wire, typically blue, that will drive our tachometers. You should not need any adapters.
Helpful?
Yes · 0
No · 0
Report
Hager71
· 3 years ago
Can a green back light be installed in this tach?
1
answer
Answer this Question
Jim from AutoMeter · 3 years ago
https://www.autometer.com/led-bulb-replacement-t1-3-4-wedge-green-for-monster-tach.html
You may change the lighting to green using the above 3295 LED.
Helpful?
Yes · 0
No · 0
Report
Hager71
· 3 years ago
Can I get this tach with a green back light in it?
1
answer
Answer this Question
Jim from AutoMeter · 3 years ago
https://www.autometer.com/led-bulb-replacement-t1-3-4-wedge-green-for-monster-tach.html
You will need to also order the 3295 Green LED in the link above.
Helpful?
Yes · 0
No · 0
Report
giebo
· 4 years ago
does this tachometer have a launch rev limiter
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. No, it does not.
Helpful?
Yes · 0
No · 0
Report
steamer97
· 6 years ago
I have this tach. Will this support a shift light? If so which one? Does it simply plug into the tach? I am aware that I can purchase shift lights that are independent but would prefer to benefit from my already installed Auto Meter 233907.
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. Yes, this tach includes an optional shift light output. It will connect to any of our shift lights, such as #5334
Helpful?
Yes · 0
No · 0
Report
mongqqse
· 6 years ago
does the 233907 have a plug for the shift lite
1
answer
Answer this Question
Matt from AutoMeter · 6 years ago
Thank you for the question. Yes, the 233907 is equipped with the connector to accept our 5331, 5333, or 5335 style shift lights.
Helpful?
Yes · 1
No · 0
Report
Streeter81
· 7 years ago
How do I remove the case for this product to cut the wires for 4-culture engine
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Thank you for contacting us. Any of the 5" AutoGage tachometers with Memory, like the 233907, actually use the buttons for calibration and do not feature the wire loops to clip. Here is a direct link to the instruction and in the top right you'll find the details on setting the calibration with buttons: https://www.autometer.com/media/manual/2650-1077.pdf
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
Also Purchased With