RockJock Johnny Joint Rod End 2in Narrow Forged Long Shank 1in-14 RH Threads 1.800in x .630in Ball

RockJock’s Forged Johnny Joint Rod Ends are found incorporated into our suspension kits and components, but are also available individually for universal usage when custom suspension is being fabricated.
Johnny Joints are available in many sizes and configurations to meet your build’s specific needs. We offer various RH and LH thread sizes of wide and narrow body forgings, which are able to provide 30 degrees+ and 40 degrees+ (respectively) of overall articulation travel, compared to around 22 degrees available from a common heim joint.
Our large catalog of center pivot balls offers a ball to suite most fitments. Balls are heat treated steel, cross-drilled for greasing and become encased in our high-density urethane bushings to provide cushioning that no heim joint can provide. Heat treated side retaining washers and a snap ring retain the ball & bushing(s) into the Johnny Joint outer forging.

The RJ-305300-102 Joint is a 2 in. diameter, narrow body and features a 9 in. long shank (from CL of joint to end of tip of threads), 3 1/2 in. of 1 in.-14 RH threads and a 1.800 in. wide x .630 in. thru-hole center pivot ball.
Additional features of the long shank design include the the jam nut being pushed outward, away from the bracket that the joint mounts in to provide more clearance and accessibility to the jam nut. Also, the smooth shank area of the joint may have a bend applied to it in a press to angle the joint for a perfect fit in your application or to gain clearance in tight spots.
Joint is externally greasable via a zerk fitting. Finish is gold zinc plating.

Kit Fits:

• Universal Application
• Upgraded replacement joint for many common long arm kits on the market

Kit Includes:

• (1) Forged Johnny Joint Assembly

Rod End Specs.:

• Forged 4140 chromoly construction
• 2 in. O.D., narrow body Johnny Joint at one end
• Measures 9 in. from CL of the joint to the end of the tip of the threads
• 3 1/2 in. of 1 in.-14 RH threads
• Features our CE-91122-4 center pivot ball (1.800 in. x .630 in.)

Rod End Features:

• The long shank design pushes the jam nut outward, away from the bracket that the joint mounts in to provide more clearance and accessibility to the jam nut.
• The smooth shank area of the joint may have a bend applied to it in a press to angle the joint for a perfect fit in your application or to gain clearance in tight spots.

Notes:

• We recommend the use of our CE-9120RW Rubber Washers on each side of this Johnny Joint to encourage the joint to re-center itself after articulating
• See CE-9113JN for a Jam Nut to fit this joint
• If a Weld-In Bung and Jam Nut are required, see CE-9113B
• Applicable Johnny Joint Tool for this joint:   CE-9112T
• Johnny Joints require non-synthetic, hi-moly lube grease such as our CE-9013G

Parts List:

• Johnny Joint Forging:   RJ-305300-2
• Johnny Joint Rebuild Kit:   CE-9112NRK
• Johnny Joint Center Pivot Ball:   CE-91122-4
• Zerk Fitting:   CE-1103K21