Superlift 14-18 Chevy Silv 2WD w/ Alum/Stamped Steel Control Arms 8in Lift Kit w/ BIL Rear Shocks

$2,690.52 CAD

Superlift SKU: slfK897B

Earn [points_amount] when you buy this item.

K897B

This is the Superlift 8” Suspension is the perfect solution for truck owners looking to run a 35” tire with a wider profile. This is a TRUE 8-inch Lift Kit for the Silverado and Sierra. It was designed and engineered to be an 8-inch lift from its conception unlike some companies that use their 6-inch lift components with a taller strut spacer to achieve 8 inches of lift. The steering knuckles and control arm crossmembers provide all the proper geometry correction for the true 8 inches of lift.

Using OE data files allows us to design lift kits that mimic the original factory designed components. This aids in installment and compatibility.  It also allows our engineers to design a kit that once installed not only retains your truck's excellent ride and handling characteristics but one that is also compatible with GM's Stabilitrac anti-skid system.

Nothing is left unattended with this 8” lift kit. The brake lines and front sway bar are relocated to make sure there is no binding through the cycle of the suspension.

The rear includes a set of fabricated lift blocks that locks in the axle ubolts though the blocks upper and lower plate giving you the strongest set of blocks on the market today. The block also has ubolts that capture the leaf pack to help counter axle wrap.

NOTE: Does NOT fit 2007-2016 Chevy Silverado’s and GMC Sierra’s with OE CAST Steel Control Arms

NOTE: This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM

Tire Wheel Backspacing Offset
35x12.5 20x9 4.5-5 -
35x12.5 20x10 4.5-5 -12 to -24


IMPORTANT DISCLAIMER:
 The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.

  • Installation time: 8 hours
  • Difficulty level: 3 of 5

NOTE: Does NOT fit 2007-2016 Chevy Silverado’s and GMC Sierra’s with OE CAST Steel Control Arms

NOTE: This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM

 

 

DOWNLOAD INSTALL GUIDE
  • 2014-2018 Chevrolet Silverado 1500 With Bilstein Shocks 8 in. Suspension Lift Kit With Aluminum Upper Control Arms With Steel Upper Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM 2WD
  • 2019 Chevrolet Silverado 1500 Legacy With Bilstein Shocks 8 in. Suspension Lift Kit With Aluminum Upper Control Arms With Steel Upper Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM 2WD
  • 2014-2018 GMC Sierra 1500 With Bilstein Shocks 8 in. Suspension Lift Kit With Aluminum Upper Control Arms With Steel Upper Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM 2WD
  • 2019 GMC Sierra 1500 Limited With Bilstein Shocks 8 in. Suspension Lift Kit With Aluminum Upper Control Arms With Steel Upper Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM 2WD

This website does not show live stock.

If the product is in stock we ship same/next day.

If a product needs to be ordered in the typical wait time is 1-2 weeks. This means the product is special ordered.

Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.

Please contact us for an accurate ETA and availability.