Synergy 07-18 Jeep Wrangler JKU 4 DR 4.5in Lift Stage 3 Suspension System

8043-45 The 4/4.5" Stage 3 System includes all the components from the Stage 2 System but exchanges the Fixed Length Lower Control Arms for Adjustable Lower Control Arms (8051, 8052) and adds Adjustable Upper Control Arms (8053, 8054) front and rear. The Adjustable Control Arms are required for locating the front/rear axles with lift heights over 3" & for adjusting the pinion angles when using aftermarket 1310-1350 drive shafts. This system also adds Front and Rear Adjustable Track Bars for centering the axles under the vehicle at the increased ride height. This system will fit 37" tires with stock fenders or 40" tires with high fenders.
Fitments:
Part #Description
8023-40JK / JKU 2-Door 4" Lift Stage 3 Kit (Fits 37" Tires, 40" with High Fenders)
8043-45JK / JKU 4-Door 4.5" Lift Stage 3 Kit (Fits 37" Tires, 40" with High Fenders)
8023-40-RHDJK / JKU 2-Door 4" Lift Stage 3 Kit (RHD) (Fits 37" Tires, 40" with High Fenders)
8043-45-RHDJK / JKU 4-Door 4.5" Lift Stage 3 Kit (RHD) (Fits 37" Tires, 40" with High Fenders)
Fitment Notes:
2012+ JK's lifted over 2" will require exhaust spacers (5017), or a front aftermarket drive shaft to prevent interference with the exhaust.
3" and up lifts, aftermarket driveshafts are recommended
Springs are designed to provide the advertised amount of lift with use of aftermarket bumpers, winches, & tire carriers. More lift will occur on vehicles in stock trim.
Springs retain the factory rake of the vehicle where the rear is higher than the front. Vehicle should sit level when loaded. Request one size shorter rear springs to level the vehicle out when unloaded.
Requires 16" or larger wheel diameter
RHD = Right Hand Drive
Features:
Stage 3 key features are front and rear track bar relocation brackets, flipped drag link, and adjustable upper and lower control arms
Front and rear bump stop extension kits
Front and rear sway bar links
Front and rear extended stainless steel braided brake lines
Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of control arm, track bar, tie rod, and drag link length without removal
Front and rear track bar relocation brackets raise track bar mounting positions increasing suspension roll center heights which improves handling on and off road
Lower control arms manufactured from high quality crush resistant 1-3/4" X .188" Wall 1026 DOM tubing to increase durability and correct caster
Features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality.
Front and rear lower shock mounts
Optional front sway bar disconnect system for ultimate trail articulation mounts sway bar up and out of the way when disconnected from the axle
Progressive wound coil spring manufactured using the latest in CNC hot winding technology keeps spring from coming unbound at full suspension droop
Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
100% bolt on components assure an easy, trouble free installation with the use of basic hand tools
Requires a maximum 4-3/4" backspace wheel or wheel spacer with factory wheel setup. 4-1/2" back spacing is recommended
Synergy suspension systems are a modular design so all components are available separately
Available For Right Hand Drive (RHD) Vehicles
Includes:
8023-40 / 8043-45 Includes:
8023-40 - 2-Door Jeep JK / JKU8043-45 - 4-Door Jeep JK / JKU
(1) 8063-30 4" Front Coil Springs
(1) 8064-30 4" Rear Coil Springs
(1) 8057-10 Snap-Lock Bump Stop Spacers
(1) 8858-40 Rear Bump-stop Extension, 4.0 Tall
(1) 8059-11 Front Sway Bar Links
(1) 8060-11 Rear Sway Bar Links
(2) 8066 Front/Rear Brake Line Kit
(1) 8056 Rear Track Bar Bracket
(1) 8062 Rear Track Bar
(1) 8055 Front Track Bar Bracket
(1) 8075-02 Front Track Bar
(1) 8000-01 Drag Link
(1) 8051 Adjustable Front Lower Control Arms
(1) 8052 Adjustable Rear Lower Control Arms
(1) 8053 Adjustable Front Upper Control Arms
(1) 8054 Adjustable Rear Upper Control Arms
(1) 8074 Rear Lower Shock Mounts
(1) 8073 Front Lower Shock Mounts
(1) 8097 Rear Coil Wedges(1) 8063-45 4.5" Front Coil Springs
(1) 8064-45 4.5" Rear Coil Springs
(1) 8057-10 Snap-Lock Bump Stop Spacers
(1) 8858-40 Rear Bump-stop Extension, 4.0 Tall
(1) 8059-11 Front Sway Bar Links
(1) 8060-11 Rear Sway Bar Links
(2) 8066 Front/Rear Brake Line Kit
(1) 8056 Rear Track Bar Bracket
(1) 8062 Rear Track Bar
(1) 8055 Front Track Bar Bracket
(1) 8075-02 Front Track Bar
(1) 8000-01 Drag Link
(1) 8051 Adjustable Front Lower Control Arms
(1) 8052 Adjustable Rear Lower Control Arms
(1) 8053 Adjustable Front Upper Control Arms
(1) 8054 Adjustable Rear Upper Control Arms
(1) 8074 Rear Lower Shock Mounts
(1) 8073 Front Lower Shock Mounts
(1) 8097 Rear Coil Wedges
8023-40-RHD / 8043-45-RHD Includes:
8023-40-RHD - 2-Door Jeep JK / JKU (RHD)8043-45-RHD - 4-Door Jeep JK / JKU (RHD)
(1) 8063-30 4" Front Coil Springs
(1) 8064-30 4" Rear Coil Springs
(1) 8057-10 Snap-Lock Bump Stop Spacers
(1) 8858-40 Rear Bump-stop Extension, 4.0 Tall
(1) 8059-11 Front Sway Bar Links
(1) 8060-11 Rear Sway Bar Links
(2) 8066 Front/Rear Brake Line Kit
(1) 8056-RHD Rear Track Bar Bracket (RHD)
(1) 8068 Rear Track Bar (RHD)
(1) 8091 Front Track Bar Bracket (RHD)
(1) 8087 Front Track Bar (RHD)
(1) 8000-01 Drag Link
(1) 8051 Adjusable Front Lower Control Arms
(1) 8052 Adjustable Rear Lower Control Arms
(1) 8053 Adjustable Front Upper Control Arms
(1) 8054 Adjustable Rear Upper Control Arms
(1) 8074 Rear Lower Shock Mounts
(1) 8073 Front Lower Shock Mounts
(1) 8097 Rear Coil Wedges
(1) 8063-45 4.5" Front Coil Springs
(1) 8064-45 4.5" Rear Coil Springs
(1) 8057-10 Snap-Lock Bump Stop Spacers
(1) 8858-40 Rear Bump-stop Extension, 4.0 Tall
(1) 8059-11 Front Sway Bar Links
(1) 8060-11 Rear Sway Bar Links
(2) 8066 Front/Rear Brake Line Kit
(1) 8056-RHD Rear Track Bar Bracket (RHD)
(1) 8068 Rear Track Bar (RHD)
(1) 8091 Front Track Bar Bracket (RHD)
(1) 8087 Front Track Bar (RHD)
(1) 8000-01 Drag Link
(1) 8051 Adjustable Front Lower Control Arms
(1) 8052 Adjustable Rear Lower Control Arms
(1) 8053 Adjustable Front Upper Control Arms
(1) 8054 Adjustable Rear Upper Control Arms
(1) 8074 Rear Lower Shock Mounts
(1) 8073 Front Lower Shock Mounts
(1) 8097 Rear Coil Wedges
More information: www.p65warnings.ca.gov