UMI Performance 78-96 GM B-Body Lower Control Arm Relocation Brackets

$135.99 CAD

UMI Performance SKU: umi3610

Earn [points_amount] when you buy this item.

3610

UMI Performance control arm relocation brackets quickly turn your factory or aftermarket rear control arms into a lift bar set-up. The relocation brackets are designed to lower the rear mount of the control arm changing the instant center point for improved traction. After product installed, you will see a great increase in traction by lowering the rearward angle of the lower control arm, allowing more force to be placed on the rear tires.  Relocation brackets have two settings to allow the lower control arm to be lowered either 2″ or 3″, depending on vehicle height. Settings are placed in a correct pattern that will allow use of all OEM control arms or any aftermarket control arms (brackets do not require a longer control arm). This product is designed to work on lowered and non-lowered vehicles, please see below for additional information.

Sway Bar: This product will work with the factory lower control arms but will not fit correctly with a factory style rear sway bar. To run a factory style rear sway bar with these brackets you need to purchase UMI lower control arms. The following lower control arms will allow the use of a factory style sway bar- Item #3611, 3612, 3613 and 3614.

Non-Lowered Vehicles: Product installed on a factory height vehicle is designed to decrease wheel hop and tire spin. Lowering the rear of the control arm instantly plants the rear tires harder into the ground, increasing traction and reducing tire spin.

Lowered Vehicles: Relocation brackets are a must for all lowered vehicles to correct lost suspension geometry. By lowering your vehicle, you are changing the lower control arm angle allowing the rear mounting point to sit higher than the front. This will, in return, cause wheel hop and a great deal of traction loss. Adding relocation brackets will correct the control arm angle prevent traction loss. Installation: Brackets are weld-in only, supplied bare metal and install in approximately 1 – 2 hours. Hardware and installation instructions are included with each kit.

MAKE MODEL YEAR
Make Model Year
Buick LeSabre 1978
Buick LeSabre 1979
Buick LeSabre 1980
Buick LeSabre 1981
Buick LeSabre 1982
Buick LeSabre 1983
Buick LeSabre 1984
Buick LeSabre 1985
Buick Roadmaster 1991
Buick Roadmaster 1992
Buick Roadmaster 1993
Buick Roadmaster 1994
Buick Roadmaster 1995
Buick Roadmaster 1996
Chevrolet Caprice 1978
Chevrolet Caprice 1979
Chevrolet Caprice 1980
Chevrolet Caprice 1981
Chevrolet Caprice 1982
Chevrolet Caprice 1983
Chevrolet Caprice 1984
Chevrolet Caprice 1985
Chevrolet Caprice 1986
Chevrolet Caprice 1987
Chevrolet Caprice 1988
Chevrolet Caprice 1989
Chevrolet Caprice 1990
Chevrolet Caprice 1991
Chevrolet Caprice 1992
Chevrolet Caprice 1993
Chevrolet Caprice 1994
Chevrolet Caprice 1995
Chevrolet Caprice 1996
Chevrolet Impala SS 1994
Chevrolet Impala SS 1995
Chevrolet Impala SS 1996
Pontiac Bonneville 1977
Pontiac Bonneville 1978
Pontiac Bonneville 1979
Pontiac Bonneville 1980
Pontiac Bonneville 1981
Pontiac Catalina 1977
Pontiac Catalina 1978
Pontiac Catalina 1979
Pontiac Catalina 1980
Pontiac Catalina 1981

This website does not show live stock.

If the product is in stock we ship same/next day.

If a product needs to be ordered in the typical wait time is 1-2 weeks.

Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.

Please contact us for an accurate ETA and availability.