VTT F9X X3/4M Rear Bushing Insert Kit

VTT-X3M-REAR-INSERT-1

Description

Looking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the Rear diff bushing insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit

Kit includes:

• One Billet Bushing insert
• Two 46mm Hardened Steel Washers
• One 12.9 M14 Bolt
• One M14 Lock nut

Add front side bushing insert for complete lock down of the bushing. This completely fills the bushing front, and rear. (Install time/difficulty is increased *

VTT F9X X3/4M Front Bushing Inserts
Looking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the front diff bushing inserts. These are pressed into the factory bushing, and fill the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a set

Kit includes:

Two Billet Bushing inserts
Two 46mm Hardened Steel Washers
Installation Guide - https://vargasturbo.com/wp-content/uploads/2024/01/VTT-F9X-X3-4M-Front-Bushing-insert-Install-Guide.pdf

All products that are designed to stiffen or reduce drivetrain movement inherently have the tendency to increase NVH or Noise, Harness, or vibration. While these bushings inserts have been found to add little NVH in most instances. Your results and sensitivity to NVH may vary. This product is designed to reduce drivetrain movement, and that was the goal when designing and manufacturing this product. Returns for NVH are not accepted once products are installed.