VTT RS3/TTRS Ultimate Front Drag Brake Kit

VTT-RS3-BRAKE-1

Product Description

Looking to make you Rs3/TTRS faster in the 1/4 mile or 1/2 mile racing? Want to run 17, or 15″ wheels, and slicks in the front? Want to drop close to 65lbs of weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimake Front Drag kit for the Rs3/TTRS. This kit will allow you to run the wheel/tire combo you need to drop your ET’s all while putting the car on a significant diet over the stock front brake set up.

The kit is a true plug and play set up using Genuine Wilwood parts, coupled with DOT approved brake lines, CNC rotor hats/brackets, and a CEL eliminator harness for the brake sensor.

This kit comes in 2 different variations

HD Version: Normal street driving, and racing duties

• Genuine SRP Cross Drilled Wilwood Performance rotors or Wilwood GT36 HD rotors
• Genuine Wilwood Dyna-Pro Calipers
• Genuine Wilwood Brake Pads
• DOT Approved Brake lines
• VTT CNC Rotor Hats
• VTT CNC Brackets
• Brake Sensor CEL ELiminator harness

Race Version: Recommended Race Duties only, not for street use

• Genuine Wilwood Ultra-Lite Scalloped rotors
• Genuine Wilwood Dyna-Lite Calipers
• Genuine Wilwood Brake Pads
• DOT Approved Brake lines
• VTT CNC Rotor Hats
• VTT CNC Brackets
• Brake Sensor CEL ELiminator harness

Weight saving information

VTT Ultimate Dragkit vs OEM Per Side:

• OEM Carbon Ceramic 30lbs per side – Total 60 lbs
• OEM Steel kit 44lbs per side – Total 88 lbs
• VTT HD GT36 Rotors – 14.6 Lbs per side – 29.2 Lbs total – 58.8 Lbs savings over Stock steel kit
• VTT HD Cross Drilled Rotors – 13.4  Lbs per side – 26.8 lbs total – 61.2 Lbs savings over Stock steel kit
• VTT Scalloped kit – 10.7 Lbs per side – 21.4 Lbs total – 66.6 Lbs savings over Stock steel kit!!!

More weight information:

• HD Rotor GT36- 9 Lbs
• HD Rotor Cross Drilled- 7.8 Lbs
• Scalloped Rotor – 5.1 Lbs
• Dyna Lite Caliper 3.2 Lbs
• DynaPro Caliper 3.6Lbs
• Rotor Hat 1Lb
• Pads (one side) 1.0 Lbs

Disclaimer: The HD kits are designed for some street use, and drag racing ONLY. Never use for heavy braking racing environments such as Auto-X or Road Racing. Scalloped kits should never be used for street driving. Always drive within your limits!