2.7t and 2.8l Top End Reseal Kit

All the gaskets and seals for resealing both cylinder heads on a 2.7t or a 2.8l 30 valve V6. Great for doing cam swaps since it has all the gaskets and seals you need.

 

Included: 2 valve cover gasket kits, all cam seals (4), cam tensioner seals and gaskets (2), cam end cap seals (2).

 

NOTE for Cam seal replacement: Before you take the cam sprockets off, you must do the following if you don't have the cam locking bar. You need to undo the 16mm bolts on the sprockets, then mark very well with a sharp screwdriver and or chisel how the sprocket keys to the cam. There are no keys on the cam or sprocket, it is a tapered fit and will spin infinitely. So you must mark it before poping the sprockets off so you can put them exactly back where they were. If you don't mark it and put the sprockets right back to where they were then you will need a cam locking bar.