MAXIVSP GDB(A-D) FULL KIT

$2,898.00 CAD

HKS SKU: 80250-AF004

Earn [points_amount] when you buy this item.

80250-AF004

SUBARU
IMPREZA WRX STI 4D
2004
EJ257
Ride Height mm
  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 646 693 ~ 627 693 ~ 627
Against stock -47 0 ~ -66 0 ~ -66
REAR Ride height *1 638 667 ~ 629 667 ~ 629
Against stock -29 0 ~ -38 0 ~ -38
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

 

Kit information
Spring of Full Kit
  F R
Spring rate N/mm(kgf/mm) 118 ( 12 ) 98 ( 10 )
Free height (mm) 170 220
Spring type Straight Straight Barrel type
Recommended range to change spring rate N/mm(kgf/mm) ±20 ( 2 ) +20 ( 2 )
Specification of damper
  F R
Damping force (Rebound/Damping)N* 1900 / 700 700 / 300
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 40 / 47 68 / 91
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data
  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
289 332 289 359 386 351
Spring
Set length(mm)
208 208 225 294 294 294
Length to ride hight
adjuster (mm)
67 110 50 103 130 95
Lever ratio 1.10 1.08
* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

 

Test vehicle information
  F R
Vehicle weight kg 895 586
Tire size (Air pressure) kPa 225 / 40 - 18 ( 220 ) 225 / 40 - 18 ( 220 )
Wheel size 7.5 JJ × 18 off 50 7.5 JJ × 18 off 50
Alignment
(Toe/Camber)
Test data 0 mm / -1°36' in 3 mm / -1°00'
Standard value 0 ± 3 mm / -0°20' ± 45' 0 ± 3 mm / -1°25' ± 45'
* Test data at HKS.

     

Parts List * It may be changed without prior notice.

This website does not show live stock.

If the product is in stock we ship same/next day.

If a product needs to be ordered in the typical wait time is 1-2 weeks.

Shipping times vary depending if the part is in stock at our warehouse and which shipping option is chosen at checkout.

Please contact us for an accurate ETA and availability.