AutoMeter Gauge Kit 2 Pc. Quad & Tach/Speedo 5in. Old Tyme White II

Product 1203 DESCRIPTION:
Save space on your dash and provide a clean look with AutoMeter’s Electronic Tach/Speedo Combo. Taking the highly precise circuits from the individual speedometer and tach and combining them into one unit gives you the accuracy and the response time you need and the convenience of a one piece solution. Compatible with nearly any factory speed sender and 1-12 cylinder applications, this unit is simple to calibrate and designed with the type of durability you expect in an AutoMeter gauge. AutoMeter’s GPS Speed Sender is also compatible for an easy, plug and play solution.
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).
Feature Points
Modern white LED through-the-dial lighting provides clear visibility during nighttime use
Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD), sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), mounting hardware, and detailed instructions for installation.
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
Tachometer is compatible with 0.5 - 6 pulse ignition signals (1-12 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions.
Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
Domed Lens
Ships With
Includes Sending Unit: Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258 - 5293 VSS Sensor
1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, 1/8" NPT to 1/4" NPT bushing, 3/8" NPT and 1/2" NPT adapter fittings.
Brackets Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 2 PC. GAUGE KIT, 5" QUAD & SPEEDOMETER, 240-33 Ω, OLD TYME WHITE II
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
4
Questions
3
Answers
Questions
Ask a question
1–4 of 4 Questions
Sort by:
▼
Menu
greg68
· 5 years ago
does this speedometer come in kph
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. Old Time White II speedometers are not available in Km/H.
Helpful?
Yes · 0
No · 0
Report
Aaron5174
· 5 years ago
I have a 1951 Chevy truck. Will these gauges mount in the factory holes or is there an adapter needed.
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. You will need to adapt these instruments into your dash using our 7039 Adapter Rings:
https://www.autometer.com/direct-fit-dash-insert-chevy-truck-47-53-2-gauge-billet.html
Helpful?
Yes · 0
No · 0
Report
Hendrik Jansen
· 5 years ago
Hello, For my restoration project chevy 3100 1949, I want to use these gauges. Can you provide it with KM because I live in Europe
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. Unfortunately, we do not have this speedometer available in a metric version.
Helpful?
Yes · 0
No · 0
Report
rondon
· 5 years ago
Would the tachometer part of the gauges be compatible with a diesel motor? Specifically the 5.9 12 valve Cummins.
0
answers
Answer this Question
Ask a question
You may also like:
RPM SIGNAL ADAPTER FOR LS ENGINES, INCL. PLUG & PLAY HARNESS
Product #9123
$182.83
MODULE, DIMMING CONTROL, FOR USE WITH LED LIT GAUGES (UP TO 6)
Product #9114
$46.01
2-1/16" PRNDL, P,R,N,D,L,OD,O,5,4,3,2,1, WHITE/CHROME
Product #1360
$258.24
GAUGE INSTALL KIT FOR LS ENGINES, INCL. FITTINGS, SHORT TEMP SENSOR, MANUAL
Product #5284
$44.99
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA
Product #5289
$250.73
SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE
Product #5292
$113.36