AutoMeter Gauge Quad 5in. 240 Ohm(e) to 33 Ohm(f) Elec Designer Black II

Product 1211 DESCRIPTION:
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).
Feature Points
Modern white LED through-the-dial lighting provides clear visibility during nighttime use
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Gauge kit includes 1/8" NPT pressure sender, 1/4" NPT adapter, 1/8" NPT temperature sender, 3/8" and 1/2" NPT adapters, mounting hardware, and detailed instructions for installation
Domed Lens
Ships With
Includes Sending Unit: Oil Sender 2242 - Water Sender 2258
3/8" NPT and 1/2" NPT adapter fittings
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 5" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/240-33 Ω, DESIGNER BLACK II
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
4
Questions
4
Answers
Questions
Ask a question
1–4 of 4 Questions
Sort by:
▼
Menu
Motorsports
· 5 years ago
On the Autometer 1211 quad gauge the volt gauge stays pegged at 18 volts when the car is running I checked at the connector and I have 14.6 volts with the car running, all the other gauges are operating as expected any suggestions.
1
answer
Answer this Question
Jim from AutoMeter · 5 years ago
Thank you for your inquiry. Please call our Technical Support line at 866-248-6357 for further assistance with the volt meter in this Quad Gauge.
Helpful?
Yes · 0
No · 0
Report
burb
· 5 years ago
do you make a 6 way pig tail for the 1211 quad gauge or do I have to use separate connectors?
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. Unfortunately, we do not make a special connector for our quad gauges, you would need to use separate connectors.
Helpful?
Yes · 0
No · 0
Report
Cooter
· 5 years ago
Are the individual gauges replacable within the quad assembly if one fails?
1
answer
Answer this Question
Zach from AutoMeter · 5 years ago
Thank you for your question. No, you cannot replace the individual gauges.
Helpful?
Yes · 0
No · 0
Report
Powerram88
· 7 years ago
Would you happen to have a 5" tach and a 5" speedometer that match this quad gauge 1211 ?. I'm wanting to install all three 5" gauges in a 1988 dodge power ram dash.
1
answer
Answer this Question
Joseph At AutoMeter · 7 years ago
Thank you so much for contacting us. Unfortunately, there is not a separate 5" tach and speedo in the Designer Black II lineup, only the 5" combo. The original Designer Black line has what you're looking for though.
Speedo/Quad kit:
https://www.autometer.com/5-quad-gauge-speedo-designer-black.html
Matching Tach:
https://www.autometer.com/5-tach-8-000-rpm-in-dash-designer-black.html
Hope this helps!
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
Also Purchased With