AutoMeter Gauge Quad 3-3/8in. 0 Ohm(e) to 90 Ohm(f)Elec Antique Beige

Product 1814 DESCRIPTION:
Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 0 ohms empty to 90 ohms full (compatible with Amid 60’s through mid 90’s GM fuel level senders).
Feature Points
Traditional incandescent lighting illuminates around the perimeter of the dial
4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Gauge kit includes 1/8" NPT pressure sender, 1/4" NPT adapter, 1/8" NPT temperature sender, 3/8" and 1/2" NPT adapters, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
Domed Lens
Ships With
Includes Sending Unit: Oil Sender 2242 - Water Sender 2258
3/8" NPT and 1/2" NPT adapter fittings
Bracket Included
California Residents: Prop 65 WARNING
REVIEWS:
Search topics and reviews
Search topics and reviews
ϙ
Search
★★★★★
No rating value
Be the first to review this product
. This action will open a modal dialog.
Write a review
QUESTIONS:
★★★★★
★★★★★
No rating value for 3-3/8" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/0-90 Ω, ANTIQUE BEIGE
Search questions and answers
Search questions and answers
ϙ
Search
0
Reviews
4
Questions
4
Answers
Questions
Ask a question
1–4 of 4 Questions
Sort by:
▼
Menu
SteveFB
· 2 years ago
Does the bezel come off? I have a 47 Morgan 4/4 Series I and the original Smiths gauges were off-white with a black frame. I am trying to replicate that look.
1
answer
Answer this Question
Thomas From AutoMeter · 2 years ago
The gauges are machine pressed together, so the bezels should not come off. If you would like, contact out customer service/ tech support on possible gauges we may have to match the other gauges.
Helpful?
Yes · 0
No · 0
Report
Curly
· 4 years ago
Are these gauges suitable for use in open top cars (Waterproof or resistant)?
1
answer
Answer this Question
Natalia from AutoMeter · 4 years ago
Thank you for your question. It is water-resistant, but not waterproof.
Helpful?
Yes · 0
No · 0
Report
Saif
· 6 years ago
Dear autometer, Are those electrical or mechanical gauges, i have ls gen iv swapped Cadillac with factory fuel sender (0-90 OHM) so does it fit my car?? Regard
1
answer
Answer this Question
Zach from AutoMeter · 6 years ago
Thank you for your question. All the gauges are electric. Yes, it will work with your vehicle and the fuel gauge will work with your factory fuel level sender.
Helpful?
Yes · 0
No · 0
Report
Arturo
· 7 years ago
Do you a gauge mounting panel for this item?
1
answer
Answer this Question
Matt from AutoMeter · 7 years ago
Thank you for connecting with us. Our 3-3/8" Quad Gauge is designed to fit into a 3-3/8" diameter hole. We offer a few vehicle specific, direct fit panels that will accept a 3-3/8", but there is not specific panel for this particular instrument. We also offer a 3-3/8" mounting cup (model 5203 or 5204) that will accept this, but you will have to trim the mounting studs and also bend any 1/4" spade terminals you add to clear the cup. Make sure to only bend any terminals you add and the not the terminals on the instrument.
Helpful?
Yes · 0
No · 0
Report
Ask a question
You may also like:
FITTING, ADAPTER, METRIC, M12X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2277
$16.69
FITTING, ADAPTER, METRIC, M16X1.5 MALE TO 1/8" NPTF FEMALE, BRASS
Product #2268
$15.68
FITTING, ADAPTER, RADIATOR HOSE, 1.5", 3/8" NPTF FEMALE, ALUMINUM
Product #2283
$62.14
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM
Product #2282
$60.03
FITTING, ADAPTER, HEATER HOSE, 5/8", 1/8" NPTF FEMALE, BRASS
Product #2280
$46.99
LED BULB, REPLACEMENT, T3 WEDGE, WHITE
Product #3288
$13.72
Also Purchased With
3-3/8" QUAD GAUGE, 100 PSI/100-250 °F/8-18V/240-33 Ω, ANTIQUE BEIGE
Product #1812
$246.31