Oil Change Additive Package - Liqui Moly LM20002KT4

Highly effective detergent additives in Engine Flush cleans interior engine before oil change.

Effect

• removes deposits, residues from all 4-stroke gasoline and diesel engines
• dissolves sludge, lacquer and isolates solid particles and liquid contaminants
• improves the combustion process and restores full engine performance
• prevents corrosion of unprotected metal surfaces
• recovers oil lubricating properties

Properties

• highly economical
• gentle cleaning
• suitable for diesel particulate filters
• tested for turbochargers and catalytic converters
• simple to use
• no pollution to the environment
• does not attack common sealing materials
• rapid cleaning

Application

One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. Pro Line Engine Flush is compatible with all commercially available engine oils. Minimum oil filling of 3 liters (3.17 U.S. QT) is required for optimum product performance. Note: Not suitable for use on motorbikes with wet clutches.

We recommend performing this flush when changing to a new oil or every 5th oil service. Every 25k miles.

Cera Tec is a high-tech ceramic wear protection product for all motor oils. Cera Tec reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Prevents direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines.

Effect:

• reduces friction and wear
• prevents direct metal-to-metal contact
• reduces fuel consumption
• lasts up to 30.000 miles (50.000 km)

Properties

• reduces frictional losses
• suitable for diesel particulate filters
• mixable with all commercially available motor oils
• increases smooth operation
• highest thermal stability
• excellent high and low temperature behavior
• tested for catalytic converters
• stable under extreme pressures
• compatible with fine filters
• no deposits
• long engine service life
• chemically inert
• reduces fuel consumption

Application

300 ml is sufficient for up to 1.3 gal (5 liters) of motor oil. Long-term effect up to 30.000 miles (50.000 km). Shake container before use. Minimum oil filling of 3 liters (3.17 U.S. QT) is required for optimum product performance.

Great to use in Engines, Manual Transmission assemblies, Differentials without clutches.

We recommend using this product every 5th oil service or every 25k miles. Cera Tec reduces the amount of friction and thereby the wear. This in turn benefits the engine, which is under less load. This can result in a lower susceptibility to repair and longer service life.